The 5522A Multi-Product Calibrator replaces the 5520A and addresses a wide calibration workload and comes with internal and external protection features that protect it against damage and make it easier to transport for on-site or mobile calibration.
Fluke 5522A can also be fully automated with MET/CAL® Plus Calibration Management Software (version 7.3 SP1 or later). It is the ideal calibrator for metrology professionals who need to perform resistance calibration, voltage calibration, current calibration and more, and who want a transportable instrument that offers them a high return on investment.
Fluke 5522A is a voltage calibrator, a resistance calibrator, a current calibrator and much more. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs.
Fluke 5522A can also measure thermocouple temperature, and pressure using one of 29 Fluke 700 Series pressure modules. When you want to find ou best calibration service in bd and best tools supplier in bd we are here for you.
Specifications: 5522A Multi-Product Calibrator
Summary Specifications
|
| Function & Range |
|
| Direct volts |
0 to ± 1020 V |
| Direct Current |
0 to 20.5 A |
| Alternating volts |
1 mV to 1020 V
10 Hz to 500 kHz |
| Volt*Hertz |
1000 V@ 10 kHz/330 V@100 kHz |
| Alternating current |
29 μA to 20.5 A
10 Hz to 30 kHZ |
| Waveforms |
Sine, square, triangle, truncated sine |
| Resistance |
0 MΩ to 1100 MΩ |
| Capacitance |
220 pF to 110 mF |
| Power (phantom loads) |
20.9 kW |
| Phase control |
0.01° |
| Thermocouple (source and measure temperature) |
B, C, E, J, K L N R, S, T, U
10 μV/°C |
| RTD (source temperature) |
Pt 385-100 Ω, Pt 3926-100 Ω Pt 3916-100 Ω,
Pt 385-200 Ω, Pt 385-500 Ω, Pt385 1000 Ω,
PtNi 385-120 Ω, (Ni120), Cu 427 10 Ω |
| Interfaces |
RS-232, IEEE 488 |
| Phase lock |
Yes |
| Frequency uncertainty |
<2.5 ppm |
| External frequency reference (10 MHz) |
Yes |
| Calibration Documentation |
17025 accredited report of calibration included |
| Oscilloscope calibrator (optional) |
Levelled sine wave from 5 mV to 5.5 Vpp max, frequencies 50 kHz to 600 kHz and 3.5 Vpp max to 1100 MHz; edge rise times of < 300ps, multiple trigger functions, lowest dc, square wave and timing uncertainty |
| Power calibrator (optional) |
Composite harmonic, flicker simulation, sags and swells simulation modes |
