Kyoritsu KEW 2009R Digital Clamp Meters
Kyoritsu KEW 2009R Digital Clamp Meters are CAT IV Clamp Meters that can degree the Voltage and Current in each very low and excessive strength circuit. And the Kyoritsu KEW 2009R Digital Clamp Meters is an Accurate True-RMS study of AC present-day or voltage with distorted waveform.
Key Features: Kyoritsu KEW 2009R Digital Clamp Meters
• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
• Accurate True-RMS reading of AC current or voltage with distorted waveform.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.
Specifications: Kyoritsu KEW 2009R Digital Clamp Meters
| AC A |
400.0/2000A
±1.3%rdg±3dgt (0 - 400.0A, 150 - 1700A) (45 - 66Hz)
±2.0%rdg±5dgt (0 - 400.0A, 150 - 1700A) (20Hz - 1kHz)
±2.3%rdg±3dgt (1701 - 2000A) (45 - 66Hz) |
| DC A |
400.0/2000A±1.3%rdg±2dgt |
| AC V |
40.00/400.0/750V
±1.0%rdg±3dgt (45 - 66Hz)
±1.5%rdg±5dgt (20Hz - 1kHz) |
| DC V |
40.00/400.0/1000V±1.0%rdg±2dgt |
| Ω |
400.0/4000Ω ±1.5%rdg±2dgt
(Electronic protection (no fuse) up to 600V) |
| Continuity buzzer |
Buzzer sounds below 20Ω |
| Hz |
10.0 - 4000Hz±1.5%rdg±5dgt
(Input sensitivityCurrent: more than 40AVoltage: more than 10V) |
| Conductor size |
Ø55mm max. |
| Output |
Recorder :
DC400mV against AC/DC400.0A
DC200mV against AC/DC2000A |
| Applicable standards |
IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1 |
| Power source |
R6 (1.5V) × 2 |
| Dimensions |
250(L) × 105(W) × 49(D)mm |
| Weight |
Approx. 540g (including batteries) |
| Included Accessories |
7107A (Test leads), 9094 (Carrying case)
R6 (AA) (1.5V) × 2, Instruction Manual |
| Optional Accessories |
7256 (Output cord) |
