Sanwa CD800A Digital Multimeter is the best tool to measure with accuracy. This auto-ranging multimeter will check AC and DC voltage and modernity in addition to capacitance, resistance, and frequency. It functions as a large, without problems readable show to be used withinside the field. It has all the primary capabilities which you count on from a very good virtual multimeter consisting of continuity check (with buzzer), diode check, and information hold.
Key Features: Sanwa CD800A Digital Multimeter
- 3-3 / 4 digits 4000 count
- 7% best accuracy
- Capacitance measurement
- Not suitable for measurement of condensers with large leak current.
- Frequency measurement (AC sine wave only)
- Data hold / Range hold
- Relative value
- Auto power off (30min.) (cancelable)
- Low power ohm (input voltage 0.4V) at continuity range
- Solid & protective body cover that can also be used as a tilt stand
- Chip holder behind the body cover
Specifications: Sanwa CD800A Digital Multimeter
|
Function
|
Measuring Range
|
Resolution
|
Input Impedance
|
|
DC Volt
|
400m/4/40/400/600V
|
0.1mv
|
DC:10M-100MΩ
AC:10M-11MΩ
|
|
AC Volt
|
4/40/400/600V
|
0.001v
|
|
DC Ampere
|
40m/400mA
|
0.01mA
|
|
AC Ampere
|
40m/400mA
|
0.01mA
|
|
Resistance
|
400/4K/40K/400K/4M/40MΩ
|
0.1Ω
|
|
Capacitance
|
50n/500n/5μ/50μ/100μF
|
0.01nF
|
|
Frequency
|
5HZ-100KHZ
|
|
Duty Cycle
|
20%-80%
|
|
Continuity
|
Buzzer sounds at between 10Ω and120Ω. Open Voltage:Approx.0.4V
|
|
Diode Test
|
Open voltage: Approx. 1.5V
|
|
Bandwidth
|
40-400HZ (sine)
|
|
Size/Weight
|
H176*W104*D46mm/340g
|
